Sale!

MATEK Mini Power Hub PDB XT60 Power Distribution Board PDB-XT60 with BEC 5V/12V for FPV drone Quadcopter QAV210 QAV180

$4.99 $4.64

Cheap power distribution board, Buy Quality distribution board directly from China matek mini power hub Suppliers: MATEK Mini Power Hub PDB XT60 Power Distribution Board PDB-XT60 with BEC 5V/12V for FPV drone Quadcopter QAV210 QAV180

Buy now

Additional information

Use

Material

RC Parts & Accs

Technical Parameters

Model Number

For Vehicle Type

Upgrade Parts/Accessories

Tool Supplies

Four-wheel Drive Attributes

Description

MATEK Mini Power Hub PDB XT60 Power Distribution Board PDB-XT60 with BEC 5V/12V for FPV drone Quadcopter QAV210 QAV180   Feature: The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronized & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently.   Feature Built-in XT60 Socket 2oz Copper, 4-Layers &1.6mm PCB Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED Indicators & Short Circuit Tolerant   Specifications General: – Input voltage range (3S-4S LiPo operation): 9 – 18V DC – Regulated 5V and 12V outputs – LED power indicators ( 5V & 12V outputs ) – 6 ESC outputs & 1 pair VCC/GND pads   ESC outputs: – Continuous current: 25A*4 or 15A*6 – Peak current (10 seconds/minute): 30A*4 or 20A*6   BEC 5V output: – Designed for RC Receivers, Flight controllers, OSD, and Servos. – DC/DC synchronous buck regulator. – Voltage: 5.0 +/- 0.1VDC – Continuous current: 2 Amps (Max.2.5A 10s/minute) – Output Ripple: 40mV (VIn=16V, VOut=5V2A load) – Short-circuit tolerant (5 seconds/minute)   BEC 12V output: – Designed for Video TX or FPV camera with linear regulator. – The battery should be 4S LiPo (13~18V DC) – Voltage: 12.0 +/- 0.3VDC – Continuous current: 500mA (Max.0.8A 5s/minute) – Short-circuit tolerant (2 seconds/minute)   BEC 12V 3S LiPo – Output voltage= 3S LiPo voltage -1V   Physical: – Dimensions: 36 x 50 x 4 mm (without XT60) – Mounting: 30.5 x 30.5mm, 3mm – Weight: 7.5g(w/o XT60), 11g(w/ XT60)   Package includes: 1* Power Distribution Board  

Reviews

There are no reviews yet.

Be the first to review “MATEK Mini Power Hub PDB XT60 Power Distribution Board PDB-XT60 with BEC 5V/12V for FPV drone Quadcopter QAV210 QAV180”

Your email address will not be published. Required fields are marked *

Brand

YuanHan